Soldering & Desoldering Station)

Soldering & Desoldering Station)

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)

Step 1

Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2

Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity

With open-valve mechanism

 
Ceramic Heater with Internal Sensor
A wide range for terminals, connectors and flat ICs
 
Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

 
Zero Volt Switch Circuit
Reduces noise during heater ON/OFF
 
Replaceable Cartridge Filter

Makes changing the filter easy

 
TIP/NOZZLE TEMPERATURE-RECOVERY FEATURES
Desoldering/Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip, TP-100N-10 nozzle)



Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our SVS-500AS).

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.




 SPECIFICATION


MODEL SVS-580AS
Voltage 110V,120-130V,220-240V AC 50/60Hz
Power Consumption 110V,120-130V (200W)
220-240V (270-300W)
Power Cord Length 1.5m
TemperatureSetting Range Deoldering Unit 250−450˚C
Soldering Unit 200−480˚C
Insulation Resistance Over 100MΩ(500V DC)
Vacuum Pump System Diaphragm system
Vacuum - 0.08MPa (-600mmHg) 
Accessories Cleaning pin TP-100CP-13
Soldering iron stand ST-76
Total Weight 4.0kg (w/o cord )
 

 

CONTROL BOX
Output Voltage 110V,120-130V,220-240V AC
Dimensions 205(W) x 170(H) x 160(D) mm
Weight 3.6kg (w/o cord, hose )
 

 

DESOLDERING UNIT
Input Voltage/Power Consumption 110V,120-130V,220-240V AC 85W
Heater Ceramaic Heater
Cord Length 1.2m
Dimensions 220 x 155mm
Weight 250g (w/o cord, hose )
Standard Nozzle TP-100N-S5
SOLDERING UNIT
Input Voltage/Power Consumption 110V,120-130V,220-240V AC 70W
Ground Resistance Less than 2Ω
Leak Voltage Less than 2mV
Heater Ceramic heater
Cord Length 1.2m
Length 190mm (with PX-2RT-B w/o cord bushing )
Weight 70g (with PX-2RT-B w/o cord )
Standard Tip PX-2RT-B



desoldering station prices

Bestsellers