Anti Static Temp. Controlled Desoldering station

Anti Static Temp. Controlled Desoldering station

OPEN-VALVE MECHANISM

Two-stage trigger switch (PAT.P)

Step 1

Pulling the trigger (lightly) activates the first stage switch. The pump starts, and the air pressure decreases in the vacuum chamber.

Step 2

Next, pulling the trigger fully activates the second stage. The open-valve will open, and the solder is sucked up at once by the negative pressure in the vacuum chamber.

400% More Suction Capacity

With open-valve mechanism

 
Ceramic Heater with Internal Sensor

A wide range for terminals, connectors and flat ICs

 
Superior Temperature-Control Circuit

To keep the temperature constant during desoldering

 
Zero Volt Switch Circuit

Reduces noise during heater ON/OFF

 
Replaceable Cartridge Filter

Makes changing the filter easy

 
Vacuum pressure compared with other goot models

The open-valve allows the device to reach vacuum pressure of -0.06MP (approx.-450mmHg) in only 0.1second. (about 4 times faster than our TP-200AS).

SUCTION CAPACITY COMPARISON

The arrow indicates solder residue.

NOZZLE TEMPERATURE-RECOVERY FEATURES

Soldering time is approx. 2 seconds / 5×5mm land (with PX-2RT-B tip)




SPECIFICATION

MODEL TP-280AS
Voltage 110V,120V,130V, 220–240V AC 50/60Hz
Power Consumption 130W (110V,120-130V)

170-200W (220-240V)
Power Cord Length 1.5m
Temperature Setting Range 250−450˚C
Insulation Resistance Over 100MΩ(500V DC)
Vacuum Pump System Diaphragm system
Vacuum - 0.08MPa (-600mmHg) 
Accessories Cleaning pin TP-100CP-07

Soldering iron stand ST-76
Total Weight Approx. 2.9kg (w/o cord, hose )
 

CONTROL BOX
Output Voltage 110V, 120-130V, 220–240V AC
Dimensions 95(W)x205(H)x256(D)mm
Weight 2.6kg (w/o cord, cord, hose )
 

DESOLDERING UNIT
Input Voltage/Power Consumption 110-130V, 220–240V AC / 85W
Heater Ceramic Heater
Cord Length 1.2m



desoldering station prices

Bestsellers